The TAPR TICC is a two-channel timestamping counter with better than 60 picosecond resolution and less than 100 picosecond typical jitter. It has an Allan Deviation noise floor below 1x10-10 for a one second measurement.
The TICC designed to measure low-rate time intervals, such as the pulse-per-second signal from a clock or GPS, with very high resolution. The TICC hardware is a "shield" that mounts on an Arduino Mega 2560 processor board, and the TICC software runs on the Arduino. Data is sent via USB to a host computer for logging and analysis. The TICC can currently perform over 100 measurements per second; we believe that software optimization will ultimately increase the measurement speed.
The TICC can output timestamp data for each channel, or the time interval between the two channels. The channel inputs trigger with about 1.7 V and are safe to 5 V. Input impedance is 1 megohm. The TICC requires an external 10 MHz reference clock at nominally +3 dBm, though the input circuit operates over a wide amplitude range.
The TICC is powered by the Arduino to which is is attached, which in turn can be powered by the USB cable from the host computer.
The TICC software is open source and available from github.com/TAPR/TICC. The repository also includes documentation, data sheets, and other information on some of the hardware components. The software is undergoing active development.
TICC systems purchased from TAPR include the TICC shield and an Arduino 2560 Mega compatible board with TICC software loaded. The systems are tested for functionality prior to delivery.
The price for the TICC w/Arduino is:
$ 205 USD
A note regarding email addresses: When checking out please use an
email address other than @earthlink.net, @hotmail.com, @live.com,
@msn.com, @outlook.com. For some reason these domains reject email from
Shipping and Handling
Shipping and Handling within the US will be by USPS Priority Mail.
International shipping costs are calculated as closely as possible. If the actual cost exceeds the estimate by more than $10.00, TAPR will contact you to get approval for the additional funds. TAPR uses insured Priority Mail International, unless the purchaser requires something else.
The operating manual (and other information) can be found in the "docs" folder of the TAPR TICC github repository at https://github.com/TAPR/TICC.
The TAPR TICC was made possible by the efforts of:
John Ackermann, N8UR – Hardware and software designer, and Project Manager
George Byrkit, K9TRV – Software development and hardware tester
Jeremy McDermond, NH6Z – Software development
David McQuate, WA8YWQ – Software development
Tom Van Baak – Beta tester
and other contributors who ask to remain anonymous